ʿ  ϵ  ҵ
   ҳ Ʒ ƷϢ ѡ ɹ Ϣ
ƷϢ Product
С ̺
     ̺
     ˫ ̺
     ʽ ̺
     R C̺
     ̺
ϵ Contact Us
绰010-62646833
      010-62646003
      010-84721855
      010-62647356
䣺andy@polynum.com.cn
ַwww.polynum.com.cn
ַгл·2żѾB705
 
 ǰҳ > ҳ >ƷϢ > С̺

 Ʒʦ񡱡ϰȫ˽ƷϢ

Polynum Super Gold С̺
Ͻṹ
ͷʷʸߴ97%ǿḯʴǶǿȼ䷽ķݣֱ10mmСݣ
ʹý飺
 ͨݶǽ
װͨɸȻ6-8
Ʒص㣺

ͷʷ㣬


Ʒ
 
ʦ
 
ϰȫ
 
Close
λ
Nominal Thickness mm  4
ȱ Reflectivity (ASTM C1371-04a) 97%
Emissivity (ASTM C1371-04a)  3%
ֵ
Heat Resistance (R) (Polynum™ Technical Book for typical residential roof)
m²·K/W 2.75
ȼ йұ׼ China(GB8624-1997) A PASS
¹ȼ (DIN 4102) Germany B1 PASS
ȼ (NF P 92-507)) France M1 PASS
Ӣȼռ (BS 476-7, horizontal fire test) UK  Class 1 PASS
Э (ASTM E84) USA A PASS
ұ׼Э (ANSI UL #723) USA A PASS
Э (NFPA #255) USA A PASS
ձȼϼ (ISO 5660) Japan Non-conbustible PASS
ȼƽȼʱ
Mean Ignition Time (AS/NZS 1530.3)
second 0
ȼƽʱ
Mean Flame Propagation Time (AS/NZS 1530.3)
second 0
ȼƽͷֵ
Mean Heat Release Integral (AS/NZS 1530.3)
Kj/m2 0
ȼƽ̷ֵ
Mean Smoke Release (AS/NZS 1530.3)
density/m 0.006
ù
Water Vapor Transmission (ASTM E 96) (methodA)
g/ft²·hr 0.0018
ù Fungal Resistance (ASTM C 1338) No Fungal Growth PASS
ʪֲ Wet Delamination (AS/NZS 4589.1)  PASS
ֲ Dry Delamination (AS/NZS 4201.1) PASS
ǿ ǿ Tensile Strength (JC/T 841-2007) N/5cm-width 349
˺ǿ Tear Strength (GB/T 529-2008) N 23.8
״ Linear Shrinkage (24 hrs in water) 0%
α
Linear Dimensional Change (110°C) (ASTMC1136-92)
< 0.2%
¶ Operating Temperature °C -45 to +97
͹
Surface Corrosion Resistance (AS/NZS 4859.1)
PASS
β
Scratch Resistance (Polyon QA standard)
PASS
ϵ
Noise Reduction Coefficient NRC (ASTM E-384)
% 45%
ϵ
Sound Transmission Class STC (ISO 140-3 & ISO 717-1)
dB(A) 35
ߴ ÿߴ Roll Size m×m 1.2×60
ÿ Roll Area 72
Close
Polynum™ Super 4mm Specification Guide
Last Update December 2007
 

Technical - Specification Guides

To ensure you are supplied genuine Polynum™ as specified, always document as follows:

Product Name: Super Polynum™

The insulation material shall be Polynum™ Super fiber-free, thermo-cellular reflective insulation 4.0mm thick, consists of small flame retardant air bubbles and two reflective high resistance pure aluminum surfaces, with low Emissivity (0.03 to 0.05 for each reflective surface), manufactured by Polyon Industries Ltd.

2. The insulation material shall comply with international insulation standards and regulations, such as AS/NZS 4859.1, DIT and JIS.  The insulation material shall be tested and certified to the following:

    • Aluminum thickness: At least 8 microns each layer
    • AS/NZS 4859.1
    • AS/NZS 4859.1 Appendix 1
    • ASTM-E408
    • ASTM-C1371: 1998
    • AS/NZS 1530.3
    • AS/NZS 1530.2
    • ASTM  C 518
    • ASTM-E96
    • ASTM C – 1338
    • ASTM C 1136-92
    • ASTM E84-97a
    • BS476 Part 7 class 1 (UK)
    • BS476 Part 6 class 0 (UK)
    • M1 (French)
    • M1 (Spain)
    • DIN 4102 B1 (Germany)
    • ASTM 384-90
    • ASTM C 177-85
    • JIS L 1092 B
    • NF P 92-505 – M1 Classification
    • EU Classification: B-s2 d0
    • AS/NZS 4201.1


3. The insulation material shall be installed as recommended at Polynum™ Insulation’s Installation Instructions and guides.
          
4. Submittals:
    • Product Data:  Manufacturer's descriptive literature for reflective insulation material; indicate compliance to specified product characteristics, including documentation of code compliance, if documentation is required.
    • Verification Samples:  Two samples, minimum size 8 inches (203 mm) square, of actual products to be installed.

 

    • Quality Assurance Submittals:  Manufacturer's printed installation instructions for each indicated project condition; include recommended fastening materials and techniques.
       
5. Delivery Storage and Handling:

Store products of this section in manufacturer's unopened packaging until installation; maintain storage conditions
recommended by manufacturer.  Store in clean, dry area.  Do not expose to rain, dew, or snow while still in roll form.

 

End of Specifications

Close
MSDS General Open
Polynum™ Super 4mm Material Safety Data Sheet
Last Update December 2007 
 
   
SECTION 1: PRODUCT IDENTIFICATION.
NAME: Polynum™ Thermal Reflective Insulation
   
DESCRIPTION: High Resistance Aluminum Foil / Multi Directional Re-enforced
  NET/ 4.00mm or 8mm fire retardant PE single or double Bubbles
  XPE Foam/ High Resistance Aluminum Foil
   
SUPPLIER: Polyon Barkai Industries (1993) Ltd.
  88 Sukhumvit Rd., Soi 49, Soi Klang, Natural park,
  Wattana, Bangkok, 10110
   
EMERGENCY CONTACT: Phone: +66 81 870 1604 or, local authorized dealers
LOCAL DISTRIBUTOR: Please contact: support@reflective-foil-insulation.com
   
SECTION 2: HAZARDOUS INGREDIENTS.
THESE PRODUCTS ARE NOT CONSIDERED TO BE HAZARDOUS, AND ARE NOT
CLASSIFIED AS `CONTROLLED PRODUCTS'. THEY COMPRISE PRINCIPALLY OF
POLYETHYLENE AND ALUMINUM FOIL THAT ARE NON HAZARDOUS.
   
SECTION 3: PHYSICAL DATA.
BOILING POINT: NOT APPLICABLE
TEMPERATURE RANGE: -50°F to 203°F / -46°C to 95°C
MELTING POINT: (°C) 145°
WATER VAPOUR PERM: <0.01perms
APPEARANCE: FLEXIBLE FOIL FACED SHEET WITH\WITHOUT NET
ODOUR: NONE
   
SECTION 4: FIRE 8 EXPLOSION DATA.
FLAME SPREAD: Will not exceed 20 (ASTM E84-94)
SMOKE DENSITY: Will not exceed 60 (ASTM E84-94)
IGNITABILITY: 0 (AS1530.3)
SPREAD OF FLAME: 0 (AS1530.3)
HEAT RELEASED: 0 (AS1530.3)
SMOKE DEVELOPMENT: 0 (AS1530.3)
SURFACE FLAME SPREAD: 1 (BS 476:Part 7)
FIRE PROPOGATION: 0 (BS 476:Part 6)
NON-DRIPPING PE: PASS (SNPE-M1)
LEANEAR SHRINKAGE: NONE
DELAMINATION (WET): Pass (Complies)
DELAMINATION (DRY): Pass (Complies)
EXTINGUISHING MEDIA: CO2, DRY CHEMICAL, WATER OR FOAM
   
USUAL FIRE HAZARDS: BUBBLE BARRIER FOIL MATERIALS ARE NOT HIGHLY
FLAMMABLE, BUT IN CONTACT WITH FLAME THEY WILL MELT AND BURN.
   
SECTION 5: REACTIVITY DATA.
STABILITY: PRODUCTS ARE STABLE AND INERT TO MOST
  CHEMICALS. NONE CAUSE A VIOLENT REACTION.
  INCOMPATABILITY: CONSULT WITH MANUFACTURER
  PRIOR TO USING AS A CONTAINMENT OR BARRIER FOR
  CHEMICALS OTHER THAN WATER.
   
SECTION 6: HEALTH & FOOD HAZARD DATA.
INHALATION: NONE. EYES & SKIN: NONE.
INGESTION: PRODUCTS SHOULD NOT BE EATEN
CONTACT WITH FOOD: YES
   
COMPLY WITH: FDA regulations: Title 21, Section 177.1520
  FDA regulations: Title 21 CF, R 178.3910
   
FOOD MIGRATION TESTS: “Migration Into Water”:
  < 1 (mg/dm2)
  < 11(mg/kg)
  According to EEC Directives:
  Directive 85/572/EEC, No. L372/16: Annex List of Stimulants
  Directive 95/128/EEC, No. L75/21: No. L75/22
  Directive 82/711
   
SECTION 7: SPECIAL PRECAUTION 8 HANDLING INFORMATION.
GENERALLY THE PRODUCTS REQUIRE NO SPECIAL PRECAUTIONS WHEN
HANDLING. HOWEVER THE PRODUCTS MAY BECOME SLIPPERY WHEN WET, AND
CARE SHOULD BE TAKEN WHEN WALKING ON THIS.
   
SECTION 8: FIRST AID MEASURES:
NOT APPLICABLE  
   
GENERAL REMARK:  
POLYON INDUSTRIES LTD., IS HACCP CERTIFIED MANUFACTURE ACCORDING TO
DS3027/CODEX ALIMENTARIUS WHICH IS A BASIC CONDITION FOR
FOOD RELATED MANUFACTURE PRODUCTS.
   
NOTE:  
THE INFORMATION CONTAINED IN THIS SHEET IS DISCLOSED IN GOOD FAITH AND IS PROVIDED TO THE BEST KNOWLEDGE OF THE MANUFACTURER. NEVERTHELESS IT IS NOT A WARRANTYAND POLYON INDUSTRIES LTD. ASSUMES NO RESPONSIBILITY FOR DAMAGESINCURRED FROM THE USE OR INABILITY TO USE THE PRODUCT

 

End of Data Sheet
 

"In RFI we believe that customers shall get full on-line support during the purchase process to reduce possible mistakes. We understand that correct area measurement is essential for proper installation, minimizing the need to compromise or, unable to complete the job."

To understand more how this calculation is determined
click here
According to the details you entered above,
you will need:
    The proposed numbers of rolls are based on your net area including wastage and overlapping.
    ַгл·2żѾǴB705    䣺hslw@polynum.com.cn
    绰010-62646833  010-62646003   010-84721855   010-62647356
    ȨУó޹˾  ICP14061472 վƼ
    ֳ̫888ֳ̫С㿪Ͽbbinƽ̨888Ͷעټ淨ˮij888ȫѶ365Ͷעƾ϶ϰټŷϻϾijֽվֽIJptϻֳֳֽ̫̫ptϻϲС㿪ŰټŶijֳ̫888IJʹ˾ȫѶ격̫ptϻֽϰټ365ַ888ֽȷIJͶעIJȫѶַ격̫ʱʱƽ̨˸淨ΰ¹ʹ˾Ŷijֳ̫